What is the quality of wooden pallets

The raw material that we have been insisting on using since ancient times is wood. It is a gift brought to us by nature. It is not only green and environmentally friendly, but also has very good characteristics and advantages, which reinforced concrete does not have. The wooden pallets made of wood have long entered the dribs and drabs of people's lives and are used in various industries. Although the raw material of the wooden pallet is wood, but there are several kinds of wood, the key is what can be selected!

According to my many years of scientific research experience in wooden pallets, pine, poplar and some very hard wood are basically used to make wooden pallets. As all kinds of materials are very long, there is no need to worry about deformation when carrying heavy goods. To a certain extent, the unbreakable quality and characteristics of wooden pallets have been achieved. Therefore, the good quality of wooden pallets is directly related to the raw materials it uses.

Tray Factory: How to Deal with Fumigation and Disinfection Trays

Fumigation and disinfection tray is one of the most demanding trays, and there is also a reason to do so. After all, if the United States does not have relevant treatment methods, such as deinsectization or actual operation, it is easy to cause some unnecessary losses, which may cause potential safety hazards to the balance of international entrances and exits. The U.S. Department of Agriculture has already issued guidelines to reduce the risk of introducing pest control into wooden packaging. Because the wooden outer packaging is often reused many times, the specific origin is difficult to determine, so the production and processing situation is difficult to determine.

The raw material of fumigation and disinfection tray is sandwich board or man-made board. Here is usually through a variety of wood residues by high pressure and high temperature.

In the treatment method, mainly including heat treatment process and methyl chloroacetate fumigation disinfection.

For the heat treatment process, it is always maintained at 56°C and maintained for as little as 30min. During fumigation and disinfection, the wooden outer packaging shall be closed. After fumigation and disinfection in accordance with regulations, it shall be placed in natural ventilation to reduce the concentration value of smoke agent below the safety concentration value. After any of the above processing, in the visible part of each piece of wooden packaging, on both sides of each article, with clear long-term identification to carry out identification. Permission to verify that the wood overpack has been resolved as specified. The identification must include the specified technical standard and its letter abbreviation indicating the treatment method. Fumigation and disinfection tray goods generally meet the customs and environmental protection regulations around the world, in the exporting country can be directly customs clearance, do not need any formalities.

Tray manufacturer: what is the application of fumigation and disinfection tray

1. Fumigation and disinfection tray is made of wood. Most of its raw materials are sandwich panels as the main body. In the production, continuous high temperature and other processing technologies are used to reasonably disinfect and sterilize, ensuring that the relevant pest control is killed. This product is also very green and environmentally friendly, so that safety risks are reduced when everyone uses it.

2. The effect of fumigation and disinfection tray in the use process is obvious, which is widely used in physical therapy halls in life. In addition, the level of everyone's love has enhanced the operator's income at some levels. It can be said that the economic income is very good.